APC Back-UPS Pro UPS BGM2200-MSX
BGM2200-MSX
Back-UPS Pro supports computers and sensitive electronics, with monitoring and control features that vary by model. Check this model’s waveform and outlets.
- Rated power
- 2200 VA / 1320 W
- Output voltage
- 230 V AC 1 phase
- Battery type
- Lead-acid internal included · Lead-acid battery
- Installation
- Not rack-mountable · Tower
Product overview
Model BGM2200-MSX is rated at 2200 VA apparent power and 1320 W real power.
Published output voltage: 230 V AC 1 phase.
Battery configuration: Lead-acid internal included · Lead-acid battery.
Runtime depends on the load and battery configuration. Input supply, earthing, battery and installation requirements must be checked before ordering. Manufacturer service and warranty statements are not a supply commitment by HRSCO; final terms are stated in our quotation.
Technical specifications
Main
| Main input voltage | 230 V AC 1 phase |
|---|---|
| Other input voltage | 230 V |
| Input connection | NEMA 5-15P |
| Maximum input current | 12 A |
| Input harmonic distortion | Less than 3 % for full load |
| Input protection | Circuit breaker |
| Switching current capacity | 15 A |
| Plug standard | C19/C21 |
| Manufacturer voltage / load data | 168...302 V |
| Input frequency | 50/60 Hz +/- 3 Hz |
| Output voltage | 230 V AC 1 phase |
| Rated power in W | 1320 W |
| Rated power in VA | 2200 VA |
| Output connection | 3 IEC 60320 C13 surge · 3 universal surge |
| Type of USB power supply | USB type A + C |
| Maximum configurable power in VA | 2200 VA |
| Maximum configurable power in W | 1320 W |
| Transfer time | 8 ms typical : 10 ms maximum |
| UPS topology | Line interactive |
| Waveform type | Sine wave |
| Full load runtime | 00:30:00 |
| Half load runtime | 00:04:19 |
| Output frequency | 50/60 Hz +/- 3 Hz sync to mains |
| Replacement battery | APCRBC216 ↗ |
Complementary
| Battery type | Lead-acid internal included |
|---|---|
| Control panel | Multifunction LCD status and control console |
| Free slot | 0 |
| Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| UPS connectivity | USB port |
| Surge energy rating | 1080 J |
| Noise filtering | Full time multi-pole noise filtering : 5% of IEEE surge let-through : zero clamping response time: instantaneous |
| Cable length | 1.5 m |
| Number of cables | 1 |
| Color | White |
| Height | 292.1 mm |
| Width | 104.14 mm |
| Depth | 408.94 mm |
| Product weight | 12.2 kg |
| Mounting support | Floor |
| Mounting preference | No preference |
| Mounting mode | Not rack-mountable |
| Two post mountable | 0 |
| USB compatible | Yes |
| Mounting position | Vertical |
| Mounting mode | Tower |
| Number of power module free slots | 0 |
| Number of preinstalled power modules | 0 |
| Additional specification | Gaming performance |
| Redundant | No |
| Range of product | Back-UPS Pro |
| Product or component type | Uninterruptible power supply (UPS) |
Environment
| Product certification | CE · CB |
|---|---|
| Equipment protection policy | Lifetime : $150000 |
| Ambient air temperature for operation | 0…40 °C |
| Ambient air temperature for storage | -15…40 °C |
| Storage altitude | 0…3048 m |
| IP protection | IP20 |
| Relative humidity | 0…95 % |
| Storage relative humidity | 0…95 % |
| Acoustic level | 45 dBA |
| Operating altitude | 0...10000 ft |
Batteries & Runtime
| Battery type | Lead-acid battery |
|---|---|
| Battery voltage | 24 V |
| Included battery module | 1 |
| Empty battery slot | 0 |
| Typical recharge time | 16 h |
| RBC quantity | 1 |
| Overcurrent protection | 15 A |
| Battery life | 3…5 year(s) |
| Battery charging power | 12 W rated |
Packing Units
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 15.5 cm |
| Package 1 Width | 35.5 cm |
| Package 1 Length | 48 cm |
| Package 1 Weight | 14.82 kg |
| SCC14 | 20731304634830 |
Contractual warranty
| Warranty (in months) | 24 |
|---|