APC Smart-UPS UPS SC620I
SC620I
Power protection for servers, network equipment and business systems. Battery chemistry, rack installation, network management and runtime expansion vary across the family; select by the exact product code.
- Rated power
- 620 VA / 390 W
- Output voltage
- 230 V AC 1 phase
- Battery type
- Lead-acid internal included · Lead-acid battery
- Installation
- Not rack-mountable · Tower
Product overview
Model SC620I is rated at 620 VA apparent power and 390 W real power.
Published output voltage: 230 V AC 1 phase.
Battery configuration: Lead-acid internal included · Lead-acid battery.
Runtime depends on the load and battery configuration. Input supply, earthing, battery and installation requirements must be checked before ordering. Manufacturer service and warranty statements are not a supply commitment by HRSCO; final terms are stated in our quotation.
Technical specifications
Main
| Main input voltage | 230 V AC |
|---|---|
| Input connection | IEC 60320 C14 |
| Manufacturer voltage / load data | 195...265 V |
| Input frequency | 50/60 Hz +/- 3 Hz auto-sensing |
| Output voltage | 230 V AC 1 phase |
| Rated power in W | 390 W |
| Rated power in VA | 620 VA |
| Output connection | 3 IEC 60320 C13 · 1 IEC 60320 C13 surge · 2 IEC Jumpers |
| Maximum configurable power in VA | 620 VA |
| Maximum configurable power in W | 390 W |
| Transfer time | 2 ms typical |
| UPS topology | Line interactive |
| Waveform type | Stepped approximation to a sinewave |
| Output frequency | 50/60 Hz +/- 3 Hz sync to mains |
| Replacement battery | RBC4 ↗ |
Complementary
| Battery capacity | 12.0 Ah |
|---|---|
| Battery type | Lead-acid internal included |
| Free slot | 0 |
| Control panel | LED status display with on line : on battery : replace battery and overload indicators |
| Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| UPS connectivity | Serial port · USB port |
| Data line protection | RJ45 modem/fax/DSL/10-100 base-T protection |
| Surge energy rating | 320 J |
| Noise filtering | Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449 |
| Number of rack unit | 0U |
| Color | Grey |
| Height | 168 mm |
| Width | 119 mm |
| Depth | 375 mm |
| Product weight | 12.27 kg |
| Mounting location | Front |
| Mounting preference | No preference |
| Mounting mode | Not rack-mountable |
| Two post mountable | 0 |
| USB compatible | No |
| Mounting mode | Tower |
| Provided equipment | CD with software · Smart UPS signalling RS-232 cable · User manual |
| Number of power modules | 0 |
| Number of power module filled slots | 0 |
| Number of power module free slots | 0 |
| Additional specification | Entry level |
| Redundant | No |
| Range of product | Smart-UPS |
| Product or component type | Uninterruptible power supply (UPS) |
Environment
| Product certification | CE · EAC · GOST · VDE · VCCI |
|---|---|
| Standard | EN/IEC 62040-1:2019/A11:2021 · EN/IEC 62040-2:2006/AC:2006 · EN/IEC 62040-2:2018 |
| Ambient air temperature for operation | 0…40 °C |
| Ambient air temperature for storage | -15…45 °C |
| Storage altitude | 0…15240 m |
| Relative humidity | 0…95 % |
| Storage relative humidity | 0…95 % |
| Acoustic level | 45 dBA |
| Heat dissipation | 70 Btu/h |
| Operating altitude | 0...10000 ft |
Batteries & Runtime
| Battery type | Lead-acid battery |
|---|---|
| Battery voltage | 12 V |
| Extendable runtime | 0 |
| Included battery module | 0 |
| Empty battery slot | 0 |
| Typical recharge time | 5 h |
| RBC quantity | 1 |
| Battery life | 3…5 year(s) |
| Battery charging power | 26 W rated |
Packing Units
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 31.8 cm |
| Package 1 Width | 50.8 cm |
| Package 1 Length | 26.2 cm |
| Package 1 Weight | 13.18 kg |
Contractual warranty
| Warranty (in months) | 24 |
|---|